Nintendo Just Updated HDR on Switch 2: Here's What You Need to Change
Nintendo's Switch 2 update fixes HDR setup. Learn the new peak brightness readout, paper white changes, and best docked-mode settings for your TV or monitor.
Published 2025-12-12
Testing the Nintendo Switch 2 six months before this update showed that most users would see a washed-out HDR picture with blown-out highlights in docked mode. Several issues made the HDR settings difficult to configure correctly. The author had created a reference chart to help viewers set up HDR. A system update from Nintendo has since changed the adjustment process, and the chart is now outdated.
Improvement 1: Peak Brightness Readout
The peak brightness value set on the first adjustment screen, which displays two suns, can now be shown by pressing the Y button on the Joy-Con. Users no longer need to count clicks to reach a specific peak brightness value for a TV, monitor, or projector.
Each click up or down on the first adjustment screen changes the value by exactly 10 nits. The author confirmed this by cross-referencing the brightness slider in Cyberpunk 2077 before the readout was added. The values also match the built-in HDR analysis tool on a Canon reference monitor:
- A peak brightness setting of 1,000 nits measured 1,000 nits on the reference monitor.
- A setting of 4,000 nits measured 4,000 nits.
- The maximum setting of 10,000 nits matches the ceiling of the HDR10 PQ standard.
Improvement 2: Default Paper White Level Lowered
The second adjustment screen sets the diffuse white level, also called HDR reference white or paper white in many HDR games.
Before the update, the default paper white level in docked mode was 500 nits. When peak brightness was set to 1,000 nits, this level was significantly brighter than the 203-nit reference white recommended by ITU-R BT.2408 for HDR10 content. The result was a flatter image with midtones pushed too high. This reduced dynamic range and left insufficient headroom for specular highlights.
The update lowered the default paper white level to 300 nits. This default applies largely independently of the peak brightness value:
- At the default peak brightness of 900 nits, the default paper white level is about 300 nits.
- At 1,000 nits, the default remains 300 nits.
- At 4,000 nits, which exceeds the peak luminance of the Canon reference monitor and prevents both suns from displaying, the default remains 300 nits.
- At the maximum of 10,000 nits, the default still remains 300 nits.
For projectors with lower peak output, such as the Valyrian Vision Master Max, the peak brightness value should be lowered to 300 nits. The default paper white level must then fall below 300 nits to leave headroom for specular highlights.
Improvement 3: Consistent Paper White Adjustment Steps
If the peak brightness value on the first screen is 900 nits or higher, each click on the second screen changes the paper white level by the same amount. Previously, the step size varied with the peak brightness value.
To set paper white to 200 nits:
- Lower the adjustment slider fully to the left, to 50.
- Move right five clicks.
The author found that 200 nits, rather than 300 nits, gives more depth and contrast in dimly lit rooms.
Recommended Configuration in Docked Mode
Displays with HGiG Support or Disabled Tone Mapping
HGiG (HDR Gaming Interest Group) is a standard that passes HDR tone mapping to the game. Displays that support HGiG, or whose tone mapping can be disabled completely, should use the following procedure:
- Enable HGiG on the display.
- On the first adjustment screen, lower the peak brightness setting until both suns are clearly visible.
- Increase the setting one click at a time.
- Stop when the sun on the right disappears. The sun on the left should still be clearly visible.
- In a reasonably bright room, keep the default paper white level and press OK to save.
- In a dark room, or if more image depth is preferred, set paper white to 200 nits as described in Improvement 3. Press OK to save.
Pressing the back button does not save the settings. The OK button must be used.
Displays without Proper HGiG Support
For displays without proper HGiG support, the recommended starting point is:
- Peak brightness: 1,000 nits on the first adjustment screen.
- Paper white: approximately 200 nits on the second adjustment screen.
This setting is not perfect for every display. It reduces clipping while preserving contrast.
Tone Mapping Considerations
HDR games look more accurate and impactful on displays that support HGiG or source-based tone mapping. These displays avoid double tone mapping, which compresses highlights and flattens the picture.
Introduction and Context
The creator's earlier HDR chart is outdated because a Switch 2 system update improved the HDR adjustment process in docked mode.
- The creator tested the Switch 2 about six months earlier and found washed-out HDR with blown-out highlights in docked mode.
- Users had difficulty configuring the HDR settings correctly.
- The creator had made an NS HDR chart to help viewers, which the update has made largely obsolete.
Improvement One: Peak Brightness Readout
The update adds a readout of the peak brightness value, so users no longer need to count clicks to find a target nit value.
- The peak brightness value can now be displayed by pressing the Y button on the Joy-Con on the first adjust HDR screen (the one with two suns).
- Each click up or down on the first adjust HDR screen corresponds to exactly 10 nits, verified by cross-referencing Cyberpunk 2077's brightness slider.
- The readings matched the inbuilt HDR analysis tool on the creator's Canon reference monitor: 1,000 nits measured 1,000 nits and 4,000 nits measured 4,000 nits.
- Peak brightness maxes out at 10,000 nits, the ceiling of the HDR10 PQ standard.
Improvement Two: Lower Default Paper White
The default paper white (diffuse white) level was lowered from about 500 nits to 300 nits and is now largely independent of the peak brightness setting.
- The second adjust HDR screen controls diffuse white, also called HDR reference white or paper white.
- Before the update, the default paper white in docked mode was 500 nits, which was too bright.
- The creator cites ITU-R BT.2408 recommending 203 nits reference white for HDR10 content.
- After the update, the default paper white is about 300 nits for peak brightness settings from 900 to 10,000 nits.
- Setting peak brightness to 300 nits requires a paper white value below 300 nits to leave headroom for specular highlights.
- The creator notes that very bright projectors such as the Valyrian Vision Master Max may need a lower peak brightness setting.
Improvement Three: Consistent Paper White Steps
When peak brightness is 900 nits or higher, each click on the paper white slider now changes the value by the same amount, which makes fine tuning consistent.
- Previously, the paper white adjustment step varied depending on the peak brightness value.
- To reach 200 nits paper white, move the slider fully left to 50, then move right 5 clicks.
- The creator recommends 200 nits paper white for dim rooms and for more image depth and pop.
Recommended HDR Configuration in Docked Mode
Recommended docked-mode settings depend on whether the display supports HGIG or can disable tone mapping.
- For TVs or monitors with HGIG support or tone mapping that can be fully disabled, enable HGIG on the display first.
- On the first adjust HDR screen, lower peak brightness until both suns are visible, then raise it one click at a time until the right sun disappears.
- Stop at that point; the left sun should still be clearly visible.
- In a reasonably bright room, keep the default paper white and press OK to save.
- In a dark room or for more depth, set paper white to 200 nits, then press OK rather than Back to save.
- For displays without proper HGIG support, set peak brightness to 1,000 nits and paper white to about 200 nits as a general starting point.
- Double tone mapping can flatten highlights, so HGIG or source-based tone mapping is preferred when available.
