~4m11:42
Scott Yu-Jan

Making a Portable M4 Mac Mini

Apr 26, 2025

Read: ~4m · You save: 8 min

Making a Portable M4 Mac Mini

Watch a DIY engineer turn a Mac mini into a portable workstation: balancing weight, 3D printing soft-touch hinge pads, and testing a multi-purpose Bambu Lab H2D.

The project develops a portable workstation built around the Mac mini. The design combines an Apple Magic Keyboard and a touchscreen monitor with a 3D-printed enclosure that holds all components together. The Mac mini is one of the most powerful computers available at its size and price, which makes portable use a natural extension of the platform.

Components

  • Mac mini (M4): Serves as the computing unit and provides the structural weight that stabilizes the setup.
  • Apple Magic Keyboard: A lightweight, thin keyboard. Newer models include a fingerprint reader. Older models are available at low cost on the second-hand market.
  • Touchscreen monitor: Has VESA mounting points and is close in size to the keyboard. It connects to the Mac mini with a single cable. It is heavier than typical monitors of similar size.
  • Enclosure: The original monitor enclosure is black, which does not match Apple products. The design replaces it with a custom enclosure.

Design Constraints

The design had to hold all components together while meeting several functional requirements:

  1. Stability: The monitor is heavier than the keyboard, so the assembly tends to tip backward. Placing the Mac mini beside the keyboard adds counterweight and prevents tipping.
  2. Port and power access: Standing the Mac mini upright blocks its rear ports and power button. Turning the Mac mini on its side makes the ports and power button accessible.
  3. Compactness: Tucking the Mac mini under the monitor reduces stability problems, but it increases the overall bulk of the setup.
  4. Ergonomics: The monitor sits higher above the work surface in this configuration.

The final layout places the monitor on a support hinge, the keyboard in front, and the Mac mini beside the keyboard as a counterweight.

Fabrication with the Bambu Lab H2D

The design is larger than the printers previously used, so the project required a larger 3D printer. The Bambu Lab H2D was selected for this purpose. Its features include:

  • Automatic ventilation that opens during printing when airflow is required
  • A light that shows print progress
  • A dual nozzle system
  • Auto-detection and calibration
  • Plotting and laser cutting capabilities in addition to 3D printing

The design required many supports. The dual nozzle system printed the supports in dedicated support filament. The supports separated easily, and the surface finish was clean.

Design Refinements

Hinge

The monitor uses an industrial torque hinge. Its friction is adjustable, and once set, the screen holds its position.

Mac mini Retention

A Velcro strap holds the Mac mini in place. The strap secures the computer and allows it to be removed easily.

Cable Routing

The monitor cable runs through the body of the enclosure, beneath the keyboard.

Airflow and Port Access

The Mac mini's exhaust and fan intake remain unobstructed. The front and rear ports remain accessible.

Screen Contact

In the first version, the screen closed directly against the plastic body. The custom paint finish on the monitor enclosure is not durable, and repeated contact would scratch it. The second version adds TPU soft pads, printed in the same build using the dual nozzle system. The pads allow the screen to close against the body without direct contact. The TPU embedding required two filaments, which typically increases print time. The dual nozzle system removes the time penalty of filament switching.

Desk Noise

The plastic body produced noise against the desk surface. The design addresses this issue through the same TPU components used for the screen contact pads.

Performance Evaluation

Display

  • The monitor offers decent resolution and color reproduction.
  • Its aspect ratio suits focused tasks such as writing.
  • The low profile supports a typing setup suited to writing scripts.

Touchscreen

  • The touchscreen responds accurately.
  • It supports only single-touch input, which limits its usefulness.
  • In practice, it supports tap and drag only.
  • For drawing, the monitor flexes when pressed, so the design does not suit drawing tasks.

Audio

  • The Mac mini's built-in speakers produce poor audio.
  • The monitor's built-in speakers produce audio of even lower quality.
  • The setup does not use either speaker system.

Limitations

  • Power: The setup requires a wall outlet. Most public workspaces, such as coffee shops, provide outlets, so the limitation is considered minor for the intended use.
  • Battery operation: The design process produced concepts for a battery-powered version. This version would be heavier and bulkier. It has not been built.

Additional Outputs

  • A version of the enclosure design is available for printing on smaller printers, including the Bambu Lab X1C and A1.
  • A Mac mini iPhone dock design was also developed.

Conclusion

The portable Mac mini setup retains the computer's ports, power button, and airflow while providing a stable, compact configuration. The H2D's dual nozzle system enabled the TPU components that solved screen contact and noise problems. The primary limitations are the wall power requirement and the touchscreen's single-touch input.

Introduction and Goals

The creator sets out to build a portable setup for the Mac mini, combining it with a keyboard and monitor so it can be used on the go.

  • The Mac mini is described as one of the most powerful computers available at its size and price.
  • The goal is a portable setup built around the Mac mini.
  • The Apple Magic Keyboard is chosen because it is lightweight and thin, and older models are cheap on the second-hand market.
  • The chosen monitor has VESA mounting points, is roughly the same size as the keyboard, is touchscreen, and needs only one cable from the Mac mini.
  • The black monitor enclosure does not match Apple products, so the creator plans to repaint it.

Design Constraints and Brainstorming

The creator works through the physical constraints of the design: balance, port access, and the power button.

  • The monitor is heavier than the keyboard, so the whole setup tends to tip backward.
  • The Mac mini can prop up the screen as a counterweight, but this blocks access to its rear ports and power button.
  • Turning the Mac mini on its side makes the ports and power button accessible, but the mini then sticks out and the design feels bulky.
  • Tucking the mini under the monitor is more ergonomic but bulkier.
  • The final solution is to weigh the keyboard down with the Mac mini beside it, so the setup no longer tips over.

3D Printing with the Bambu Lab H2D

The creator uses the Bambu Lab H2D to print the large design, using dual-nozzle support filament for overhangs.

  • The design is large, so a bigger 3D printer, the Bambu Lab H2D, was needed.
  • The H2D has automatic ventilation that opens during prints and a light that shows print progress.
  • The dual-nozzle system is used to print with dedicated support filament for large overhangs.
  • Supports removed easily and the surface finish looked good.

Soft TPU Pads and Refinements

The creator adds soft TPU pads printed with the dual-nozzle system so the screen closes gently against the body and the paint is protected.

  • The plastic body made a hollow sound against the desk, which was addressed with the H2D's plotter capability.
  • The screen's hinge closes directly against the plastic body and could scratch the custom paint finish.
  • The creator usually avoids two-filament prints because of the time lost to filament switches, but dual nozzles remove that concern.
  • TPU embedded soft pads let the screen close and sit gently against the body.

Speakers and Power

The creator rejects the built-in speakers of both the Mac mini and the monitor and accepts that the setup still needs a wall outlet.

  • Both the Mac mini's built-in speakers and the monitor's speakers are poor quality.
  • The setup still requires a wall outlet, though most coffee shops and similar workplaces have outlets.
  • A battery-powered version is possible but would be heavier and bulkier, and the creator asks viewers if they want a video on it.

Final Design Features and Monitor Impressions

The creator describes the design's functional outcomes and his impressions of the monitor and touchscreen.

  • The cable runs securely through the body under the keyboard.
  • The Mac mini's exhaust, fan intake, and front and back ports are unobstructed.
  • A Velcro strap holds the Mac mini securely while remaining easy to remove.
  • An industrial torque hinge supports the monitor, and its friction is adjustable.
  • The monitor's aspect ratio and low profile suit focused writing tasks.
  • The touchscreen is responsive but lacks multi-touch, so it is limited to tap and drag. It is not well suited to drawing because the monitor bounces when pressed.

The Bambu Lab H2D as a Multi-Purpose Tool

The creator praises the H2D as a multi-purpose tool that makes laser cutting, plotting, and 3D printing accessible in a small space.

  • The creator's apartment is too small for several separate machines, so an all-in-one tool was needed.
  • The H2D supports 3D printing, plotting, and laser cutting, and the creator began laser cutting within ten minutes of unboxing it.
  • Tool heads switch quickly, and the machine can auto-detect and calibrate itself.