~6m10:16
Lucas Alpay

Why Your "Good" Scenes Still Feel Flat (The 1-Question Fix)

Nov 19, 2026

Read: ~7m · You save: 3 min

Why Your "Good" Scenes Still Feel Flat (The 1-Question Fix)

Your scene feels flat, but the problem isn't the plot. Learn the 7-question hierarchy that starts with one question: who has the most to lose?

A scene can have clean grammar, believable dialogue, and actions that happen in the right order, and still feel flat. A boring scene is rarely boring because nothing happens. It is usually boring because the writer never decided who stands to lose the most. The method below uses seven questions to plan a scene before drafting. The first question governs the other six.

The author has published 12 books. Before drafting, the author runs this method on every scene. Some of the scenes the author wrote without it did not work, and the author states that those failures taught more than the successes.

Question 1: Who Has the Most to Lose?

Start here, not with plot or events.

Most writers choose a point of view out of habit, usually the character to whom the chapter belongs. This approach is a mistake. Point of view is not a matter of ownership. It is a matter of pressure. Place the camera inside the character who stands to lose the most in this room, within the next few minutes.

Consider two people arguing in a kitchen. Inside the character who is only annoyed, the scene reads as a conversation. Inside the character who is about to lose the marriage and has not yet said so aloud, the same kitchen and the same words become unbearable. Only the stake changes the scene.

Name the character with the most to lose. That character is the point of view. Making this one decision resolves roughly half of the flat scenes the author has read.

Question 2: What Should the Reader Know at the End?

Writers often treat the scene as a place to show an event, such as a dinner party. The actual job of a scene is the gap between what the reader knows at the start and what the reader knows at the end.

Define that gap before drafting a single sentence. For example, at the end of the scene, the reader may learn that the brother has been lying the entire time. The reader may also learn something quieter, such as that the character will never forgive the brother, even when she says she does.

The test is direct. If the reader knows the same things at the end of the scene as at the start, the writer has produced a delay, not a scene. Readers sense a delay even when they cannot name it.

Questions 1 and 2 are linked. The character with the most to lose is usually the one who receives the new information, and that information hits that character hardest.

Question 3: What Does the Character Want?

With the point of view and the reader's takeaway set, enter the character's head and identify what the character wants in this scene. Do not use the life goal, such as finding love or avenging a father. Use the want the character needs in the next five to ten minutes. Examples include:

  • Get the brother to admit it.
  • Leave the room before crying.
  • Order a coffee without falling apart.

Small, specific wants work better than large, vague ones.

Question 4: What Stands in the Way?

A character who wants something and immediately gets it has not entered a scene. The character has run an errand. The want must collide with an obstacle. The obstacle may be another person, a circumstance, or the character's own pride blocking the exact thing the character needs. The last type is often the strongest.

The goal and the obstacle must both belong to the character with the most to lose. When a writer assigns the stakes to one character and the goal to another, the scene loses force. Keep both on the same character.

Question 5: What Does the Character Feel, and What Should the Reader Feel?

Every scene runs two emotional tracks. One is what the character feels. The other is what the writer wants the reader to feel. These tracks are separate and often opposite.

A character can appear calm on the page, making tea and saying she is fine while she folds the same shirt for the third time. The reader feels tension because the reader sees what is coming and the character does not. The space between the two tracks is where the reader's engagement usually sits.

The author wrote for years with the character feeling exactly what the author wanted the reader to feel. The result was flat. A sad character produced a sad reader, and nothing more. Once the author learned that a character could laugh in a scene that quietly unsettles the reader, the fiction improved.

Ask both questions: What does this character feel? What should the reader feel? Then examine the distance between the two answers.

Question 6: What Is the Setting Doing?

Setting is often treated as background, with a description of furniture and weather. Setting functions as a pressure system. The useful question is not what the place looks like, but what the place does to the character with the most to lose.

A breakup in a crowded restaurant prevents the character from raising her voice. The room constrains her. The same breakup in an empty house does the opposite. The silence gives each word too much weight. The conversation is identical, but the location determines how it unfolds.

Choose the location that makes the character's task harder. Examples include a funeral where a character must hide relief, or a birthday party where a character has just received the worst phone call of her life. The setting should apply pressure.

Question 7: How Is Tension Raised?

Tension does not come from additions at the end of a scene. It arises from the gaps and pressures built in Questions 1 through 6.

Four techniques produce tension:

  1. Withhold information. The character knows something the reader does not, or the reader knows something the character does not. Either gap creates pull.
  2. Use a ticking clock. Give the scene a deadline. A train leaves in nine minutes, or visiting hours end at 8:00. Each line of dialogue then has a cost in time.
  3. Increase the want and the wall at the same time. Do not only raise the stakes. Make the obstacle harder at the moment the goal becomes more important. A character who needs the outcome more, against worse odds, creates dread.
  4. Slow down. When the key moment arrives, do not rush it. Extend it. Let a character's hand rest on a doorknob for an entire sentence. Tension exists in the time a writer is willing to take.

Running the Questions in Order

The seven questions form a hierarchy, not a checklist. Run them in this order:

  1. Identify who has the most to lose. This sets the point of view and the pressure.
  2. Define what the reader knows at the end. This sets the purpose of the scene.
  3. Establish the character's want and the obstacle, both assigned to the same character.
  4. Separate the character's emotional track from the reader's.
  5. Choose a setting that makes the character's situation harder.

Tension is not a separate step. It results from applying the first six questions to one character without allowing that character an easy exit. Planning this on an index card takes about two minutes and can be done before drafting.

Applying the Method to a Flat Scene

Open the draft and locate a scene already known to be flat. Do not rewrite it immediately. Answer one question: Who has the most to lose in that scene, and is the writing actually inside that character? In most flat scenes, the answer is that the writer is not inside that character.

Correct this first. The remaining questions follow from that correction.

The Problem with Flat Scenes

The speaker says flat scenes are rarely boring because nothing happens, but because the writer never decided who is bleeding. Seven questions are offered, organized as a hierarchy led by the first.

  • A boring scene is almost never boring because nothing happened; it is boring because the writer never decided who was bleeding.
  • The speaker presents seven questions to ask before writing a single line of a scene.
  • The seven questions form a hierarchy, not a checklist; one question quietly runs the other six.
  • The speaker has published 12 books and says failed scenes taught more than successful ones.

Question One: Who Has the Most to Lose

The first question is who has the most to lose in the scene, which determines POV. POV is a pressure choice, not an ownership choice.

  • Question one: who has the most to lose in this scene?
  • Most writers pick POV out of habit, choosing whoever the chapter belongs to; the speaker calls this a bad move.
  • POV is a pressure thing: place the camera inside the person who stands to lose the most right now.
  • Kitchen argument example: inside the annoyed person it is a conversation; inside the person about to lose the marriage it is unbearable.
  • The speaker claims this single call fixes about half the flat scenes they have read.

Question Two: The Scene's Job and Reader Takeaway

The second question is what the scene is for: the scene's job is the gap between what the reader knows at the start and at the end. A scene where the reader knows the same things at both points is a delay.

  • Question two: what is this scene trying to do? Every scene has a job.
  • The job is not to show the dinner party; the job is the gap between what the reader knew walking in and what they know walking out.
  • Write the reader's takeaway down before drafting one sentence.
  • Examples: the brother has been lying the whole time, or she will never forgive him even when she says she does.
  • Test: if the reader knows the same things at the end as at the start, the writer wrote a delay, not a scene.
  • The person with the most to lose is usually the one holding the new information that will hit hardest.

Questions Three and Four: Want and Obstacle

The third question is the character's want for the immediate moment, small and specific rather than a life goal. The fourth is the obstacle, which turns a moment into a scene; goal and obstacle should sit on the same character.

  • Question three: what does the character want in this scene for the next 10 minutes or even five?
  • Examples of wants: get the brother to admit it, get out of the room before she cries, order a coffee without falling apart.
  • Small and specific wants beat big and vague ones.
  • Question four: what is in the way? If the character gets what they want easily, it is an errand, not a scene.
  • Obstacles may be another person, the situation, or the character's own pride.
  • Goal and obstacle should both sit on the person with the most to lose; splitting stakes and goal across characters makes the scene go limp.

Question Five: Emotional Tracks

Question five separates the character's emotional track from the reader's intended emotional track. The gap between them is where tension usually lives.

  • There are two emotional tracks in every scene: what the character feels and what the writer wants the reader to feel.
  • Beginners assume the two align; often they are opposites.
  • Example: a calm character making tea and folding the same shirt while the reader's stomach knots because the reader sees what is coming.
  • The speaker wrote characters feeling exactly what they wanted the reader to feel (sad character, sad reader), which was flat.
  • Making a character laugh in a scene that quietly guts the reader improved the speaker's fiction.
  • Practice: ask what the person feels, ask what the reader should feel, then explore the distance between them.

Question Six: Setting as Pressure

Question six treats setting as a pressure system that acts on the person with the most to lose, not as wallpaper. The setting should make the character's job harder.

  • Question six: what is this place doing to the person with the most to lose?
  • Breakup in a packed restaurant: the character cannot raise her voice; the room gags her.
  • Breakup in an empty house: the silence gives every word too much space.
  • Pick the location that makes the character's job harder.
  • Examples: a funeral where someone must hide relief; a birthday party where someone just received the worst phone call of their life.
  • The setting should be squeezing.

Question Seven: Raising Tension

Question seven is tension, which is not a separate step but comes from the gaps built earlier. The speaker gives four levers: withholding, a ticking clock, raising want and wall together, and slowing down key moments.

  • Question seven: how do you raise the tension? Tension comes out of the gaps already built, not sprinkled on at the end.
  • Lever one: withhold, where either the character or the reader knows something the other does not.
  • Lever two: the ticking clock, such as a train leaving in 9 minutes or visiting hours ending at 8:00, so every line of dialogue costs time.
  • Lever three: raise the want and the wall at the same moment; make it harder right when it matters more.
  • Lever four: slow down at the moment of impact; stretch it, such as letting a hand sit on a doorknob for a whole sentence.
  • Tension lives in the time the writer is brave enough to take.

Running the Hierarchy

The speaker gives the order for running the questions: who has the most to lose, the reader's end-state, want and wall, the two emotional tracks, then setting. Tension results from stacking the first six onto one character.

  • Order: (1) who has the most to lose, which sets POV and pressure; (2) what the reader knows by the end; (3) want and wall; (4) character and reader emotion tracks; (5) setting that makes all of it harder.
  • Tension is what happens when the first six are stacked onto one character and that character is not let off easy.
  • The process can be done on an index card before drafting, in about 2 minutes.

Your Next 24 Hours

The speaker ends with a 24-hour exercise: find a flat scene, do not rewrite yet, and answer the who-has-the-most-to-lose question while checking whether the writer is inside that character.

  • Action: open the draft and find the scene you have been avoiding that you know is flat.
  • Do not rewrite it yet; answer only the first question: who has the most to lose in that scene?
  • Check whether you are actually inside that person; the speaker bets the answer is no.
  • Fix that first.
  • The speaker invites viewers to share the scene they ran this on in the comments.